PDF PG13 Progressive Pulsation Damper Installation
How to ensure lowest in place cost and most performance by standard installation methods.
Smoothing Progressive Cavity pump systems with the most economical Pulsation Damper
1). Hope, 2). Sure, but only --, 3). Certainly 3" thru. 12" best value.
| 2. Please move your mouse over the pump that has your choice of damper type attached to it.
3. When you click on that picture, of materials or damper type, a table of those damper types will appear.
Click Here for Dampers for your Pump listed by Dimensions & Connection Size
|, (green damper below) with Liquid bladder.
Where viscosity of the liquid being pumped, is sufficiently low that the pump could if necessary perform a suction lift, then the benefits of directing the flow fluctuations straight at the inside of the flexing bladder, without an pressure change necessitated to cause a flow reversal, gives the smoothest result.
The advantage of being able to flush in place, along with first in - first out - constant temperature, agitation and tolerance for suspended solids, makes the PIPEHUGGER first choice for small systems up to 2" pipe diameter.
Off the shelf inventory dampers are lowest cost standard flow-through.
PUMPS make FLOW, SYSTEMS cause PRESSURE, pressure pulsation is a system response, AND a system responsibility NOT a pump manufacturers liability.