PulseGuard Pulsation Dampers
PulseGuard: Guarding Against Pulsation
Pump Pulsation Dampers
Fluid Flow Control Animations

Low Pressure Pulsation Dampers with Gas in the Elastomer Bladder

Low Pressure Gas in Elastomer Bladder Type Pulsation Damper Sizes HOME


Pulsation Dampers - Gas in Elastomer Bladder

Low Pressure | Plastic and Aluminum | High Pressure


PipeGuard Typical volumes and pressures for small low pressure gas in elastomer bladder type pulsation dampers.
Type / Ordering Volume Design Pressure @93 C Connections (to pump / to sys.) Std Ports 45x45 Max single flange  Length without pipes Diameter Weight Spares Kit Part Number
  (Liters) (Bar)       (mm) (mm) (kg)  
PiG-**- .016 240 1/8"x1/8" NF Flange/welding cost/weigh more than mini damper 104 44 1 B24x50 ?
PiG-SS- .032 125 1/4"x1/4" NF   165 35 2 B24x80 ?
PiG-SS- .1 85 3/8"Fx1/4" NF   152 60 2 B44x75 ?
PiG-SS- .16 115       221 48 3 B36x120 ?
PiG-SS- .25 85 1/2"Fx3/8" NF .75" (extra chg) 191 70 5 B57x98 ?
PiG-SS- .33 105       264 60 4 B50x160 ?
PiG-SS- .5 85 1/2"Fx3/8" NF 1" (extra chg) 267 70 6 B57x171 ?
PiG-SS- .5 85 3/4"Fx1/2" NF 1.25" (extra chg) 290 73 5 B62x175 ?
PiG-SS- .66 85 3/4"Fx1/2" NF 1.5" (extra chg) 318 73 7 B62x207 ?
PiG-SS- .75 125       315 73 7 B62x207 ?
PiG-SS- 1 50 3/4"Fx3/4" NF 1/2" 300# 368 88 17 B72x255 ?
PipeGuard Typical volumes and pressures for medium low pressure gas in elastomer bladder type pulsation dampers.
Type / Ordering Volume Design Pressure @93 C Connections (to pump / to sys.) Std Ports 45x45 Max single flange  Length without pipes Diameter Weight Spares Kit Part Number
  (Liters) (Bar)       (mm) (mm) (kg)  
PiG-SS- 1 62 1"Fx1" NF 1.0" 600# 279 114 25 B98x131 ?
PiG-SS- 1.15 105       429 89 11 B72x315 ?
PiG-SS- 1.25 50 3/4"Fx3/4" NF 1/2" 300# 445 88 22 B72x315 ?
PiG-SS- 1.6 60 1.25"Mx1" NF 1.0" 600# 381 114 25 B98x232 ?
PiG-SS- 1.8 90       404 102 14 B86x275 ?
PiG-SS- 2 50 1.5"Mx1.5" NM 1.0" 600# 274 170 30 B98x300 ?
PiG-SS- 2.5 90       439 114 18 B123x267 ?
PiG-SS- 3 60 1.5"Mx1.5" NM 1.5" 600# 363 141 36 B123x267 ?
PiG-SS- 3.25 60 1.5"Mx1.5" NM 1.5" 600# 467 141 40 B123x295 ?
PiG-SS- 4.25 105       500 141 23 B110x360 ?
PipeGuard Typical volumes and pressures for large low pressure gas in elastomer bladder type pulsation dampers.
Type / Ordering Volume Design Pressure @93 C Connections (to pump / to sys.) Std Ports 45x45 Max single flange  Length without pipes Diameter Weight Spares Kit Part Number
  (Liters) (Bar)       (mm) (mm) (kg)  
PiG-SS- 4.1 60 2"Mx2"     528 141 45 B123x257 ?
PiG-SS- 4 50 3"Mx2" MW 2.0" 300# 348 170 47 B139x212 ?
PiG-SS- 5 50 3"Mx2" MW 2.0" 300# 457 170 56 B139x325 ?
PiG-SS- 6 105       559 168 32 B139x420 ?
PiG-SS- 8 50 3"Mx2" MW 2.0" 300# 559 170 64 B139x420 ?
PiG-SS- 11.5 60 3"Mx3" MW 4.0" 300# 610 218 96 B195x360 ?
PiG-SS- 14 90       737 219 109 B184x580 ?
PiG-SS- 20 40 3"Mx3" MW 5.0" 300# 762 272 177 B230x500 ?
PiG-SS- 35 40 4"Mx4" MW 6.0" 300# 914 323 324 B260x600 ?
PiG-SS- 50 40 5"Mx5" MW 8.0" 300# 1067 356 336 B300x700 ?


Phone: 44 161 480 9625 • UK Freephone: 08080 LO PRICE (56 77423) • Fax: 44 161 480-9627
Pulsation Damper RFQ



























click here for clickable pictures of pumps, systems, & pulsation dampers.

Pulsation Damper Drawings   PulseGuard Limited is in Europe

Flow fluctuation & pulse interception type pulse dampers, which guard against pressure pulsation using PulseGuard pressure vessel design technology. PulseGuard pulsation dampeners, hydraulic accumulators, or surge suppressors dampen pressure pulsation & smooth system flow because they do not allow pressure pulses to bypass dampening chamber by use of a “T”. Our high efficiency pulsation dampeners design ensures 300% more performance size for size than “T piece” pressure vessel designs. We provide smooth system flow & pressure pulse damping, while saving you cost of installing a extra "T".

"Pulsation dampeners that do, fluid flow goes through, but pressure pulsation does not"

Pulsation Dampers From Inventory:

Liquid in bladder
dampners have a large diameter liquid chamber, relative ports, dissipate pressure waves, large diameter bladder design responds even at 0.05 Bar. Corrosive liquids go inside bladder, saving cost of Titanium, Hastelloy, Tantalum, etc. external pressure vessel shells.
Gas in bladder
type for low, medium, high, super, & extreme pressure, gas in bag (bladder) pulse dampener in stainless, steel, or plastic, design includes bladder internal web stabilization.
Flow-through flex-tube
pulsation dampeners for sludge, slurries, high viscosity, & liquids containing particulate. For pipe sizes: 0.75" through 14, pressure pulse / flow fluctuation attenuating capability, straight-line "clear-flow" path from in to out.
PTFE diaphragm
pulsation dampeners designed for use where double layer / "sandwich" PTFE diaphragm head metering pumps are required for hermetically sealed toxic, pyroforic, or hazardous duty.
No moving parts,
acoustic, bladderless, foamless pulse dampeners / pressure pulsation filters.
Food & drug
smooth, clean, or polished pressure vessels for use in hygienic & food grade industry applications including: viscous liquids & slurries, clean in place, temperature regulated (thermal jacketed or insulated), high pressure liquid chromatography (hplc), among others.

 



 Pulsation Damper Distributors
Low Pressure PTFE Membrane Types High Pressure PTFE Diaphragm Dampers Bladder Accumulators / Pulsation Dampeners Elastomer Bladder Dampers / PipeHugger Low Pressure Elastomer Bladder Damper / PipeHugger High Pressure Flow Through Flexible Tubes / PumpGuard
PulseGuard
PulseGuard Pulsation Dampers
International: --44 (0) 161-480-9625
UK Free Phone: 08080 LO-PRICE (56-77423)
Email: PG.Stabilizers.Sales.UK@Gmail.com
Pulsation Dampers | Pulse Damper Drawings
PulseGuard Pump Pulsation Dampers PulseGuard Pulsation Dampers PulseGuard Ltd. Pulsation Dampers Dampners from stock, for United Kingdom - Europe - and Asia

Copyright © 2014 PulseGuard. | PulseGuard is the UK trademark of PulseGuard Limited and the US trademark of PulseGuard Inc..