Pulsation Dampers - The Difference is in the Details

Secondary containment, Hazard alert, Controlled de-pressurization, Seal release-safety features, are part of our Safety Design Code (Not ASME, PED nor ISO)

Extending the life of Virgin Teflon® (PTFE, EIDP Teflon)
not recommended for: Nitric, Cholors, -ics, ides, bromines etc. We prevent loss of Nitrogen pre-fill gas by an elastomer backing A, which also contains an anti-extrusion stiffener B. and adds some resilience reducing the rate of PTFE "cold flow".

1. Porosity removed and resilience gained by re-gelling.
2. Molded multi wave form, no stretching.
3. Offset role points prevent fatigue concentration.
4. Anchorage outboard the anti extrusion plate seal.
5. Peripheral sealing, not cruch crimping.
6. Two layers of "Flexflon" & permeation, alert filament track between, option.
7. Primary seal, and secondary containment option.

5:1 Safety Factor, "Fail Safe" Pulse Dampers
Nitrogen cushion Pre-Fill energy is released safely at 400% design pressure.

The deflection that enables seal extrusion is 0.30mm / 0.012" only and is prior to yield.